Envirovalve is an inexpensive
system offering both easy
operation and no heavy
moving parts...
Find More
system offering both easy
operation and no heavy
moving parts...
Find More
Benefits of the Envirovalve Unit
Can be simply retro-fitted
1. Cost effective value
- Costs less than traditional mechanical gate and penstock valves
- Simple low-cost installation, no civil work required
- Power requirement: low-solar; battery; mains
- Prevent prosecution
2. Easy to use
- Four activation methods
- manual - push button
- remotely - by radio control or mobile phone
- fire alarm systems - prevent firewater runoff
- oil, pH, COD, turbidity monitor - don't go over your discharge consent
3. Meets EA guidelines
- Above ground oil storage tanks: PPG2 Section 7 - dealing with spillages: "if a spill should occur, immediate action should be taken to contain the oil (or chemical) to prevent it entering any drains or watercourses"
- Under the Anti-Pollution Works Regulations 1999: Any person knowingly causing or permitting pollution (or its likelihood) to controlled waters may be required to carry out various works including clean up. This can often lead to remediation costs vastly in excess of any fines imposed.
- Preventing pollution on industrial sites: PPG11 Section 5 - Surface Water Drainage. A cut-off valve on the drainage system provides improved security if used to isolate designated risk areas.
- Under the Water Industry Act 1991: - It is an offence to release any material to foul drains without specific formal consent from the relevant sewage undertaker.
4. Versatile
- Use in emergency or as part of day-to-day operations during deliveries
- Use in all types of drain and sizes 4" to 48"
- Broad chemical compatibility
envirovalve is...
... Easy to maintain
- The Envirovalve does require maintenance once every 12 months. This involves a visit by an Envirovalve Engineer, the bladder will be inspected and tested and drain and bladder contact areas cleared. Firing mechanism is tested and reset, the unit will be cleaned and new labels put on. The unit will also require service after use where the bladder has come into contact with pollutants, it will not require servicing again after this for a further 12 months.
... Inexpensive
- Compared to traditional mechanical gate and penstock valves, the Envirovalve is an inexpensive alternative offering both easy operation, no heavy moving parts and easy inexpensive installation with no major construction work required. This combined with four different activation methods means the Envirovalve can be made to suit any budget.
... Easy to use
- The envirovalve pollution prevention system can be activated manually or automatically
... Adaptable
- The Envirovalve can be used in all types of drains, plastic and ceramic.
- It can be used in an emergency or as part of site day to day operation during deliveries or other procedures that could lead to pollution.
- It has been used to prevent flooding and to diverting liquids away from treatment plants and into holding tanks.
- The Envirovalve has many uses and is now used nationally by the Fire Brigade in its portable form.

